#Peterson strobe tuner strobo clip manual#
#Peterson strobe tuner strobo clip code#
#Peterson strobe tuner strobo clip plus#

Your StroboClip HDC has two screens of operation in which parameters can be adjusted.

#Peterson strobe tuner strobo clip plus#

When an adjustable parameter is flashing, pressing the value Plus ( + ) and value Minus ( - ) buttons together will reset that parameter to its default value. The altered parameter will remain on the display if the parameter value has been changed to a non-default value. Alternatively, a few seconds of inaction will cause the parameter adjustment to time-out, ending parameter flashing and confirming changes. In some cases, Pressing and Holding either of the Value buttons will continuously and rapidly increment or decrement the value until released.Īfter adjusting a parameter value, the next click of the Menu button will end the parameter flashing and confirm any changes. Once you arrive at the desired parameter, a Click or Press of the Plus ( + ) or Minus ( - ) Value button will increment or decrement the value of that parameter. General Navigation and Parameter AdjustmentĪny adjustment of the default settings of your StroboClip HDC may be performed using the three buttons located on the top edge of your tuner.Ī Click or Press of the Menu button will navigate through the adjustable parameters which will flash on the display as you pass through them.

#Peterson strobe tuner strobo clip code#

If you play a stringed instrument, it helps to use your finger or thumb to gently pluck the string instead of a plectrum.įor more information on Strobe Tuning and why it's the best way to tune your instrument, scan this QR code or visit:

It may shift slightly due to the 'real-time' speed of a strobe tuner. It's OK if the strobe image doesn't completely stop. If you are new to strobe tuners, you will notice that theyĪre much more sensitive and accurate than your previous When the image is stabilized or 'caged' the note is in tune to 0.1 cent accuracy.Ĭlick Here to see videos of the SCHDC Tune Screen. The strobe bands scroll counter-clockwise ( left ) if your instrument is flat of the displayed note and clockwise ( right ) if your instrument is sharp of the displayed note. The note being tuned appears in the center of the screen. Briefly holding the power button activates and deactivates the tuner. After charging the battery, attach the StroboClip HDC to the headstock or scroll of a stringed instrument, or the bell or lead pipe of a wind instrument. It is recommended to fully charge the battery before first use.įor normal operation, the tuner can be used out of the box no special adjustment is needed.

When completed, the battery icon will be full. The lower-left corner of the LCD will show an empty battery icon with a lightning bolt to indicate that the SCHDC is charging. To charge, insert the included USB-C cable into the USB-C port on the tuner and the USB-A end of the cable into a USB charging device, like those commonly used to charge cellular phones. The SCHDC operates with a rechargeable lithium-ion battery.

#Peterson strobe tuner strobo clip manual#

Please read through this manual and use the tuner as directed. Product Dimensions LxWxH: 1.75' x 2.4' x 1.StroboClip HDC™ Quick Start Manual v1.3 ENĬongratulations on your purchase of the Peterson StroboClip HDC.Display Resolution: 192 Segments (96 per row ).Highly customizable for just about any tuning situation. User presets and sweetened tunings makes it a brease to dial in just the right tuning for your particular rig. Peterson has long been an industry standard in the world of strobe tuners, and this clip-on friendly version makes for extremely accurate tuning. This Peterson Strobe Tuners - StroboClip HD is a great addition to any player looking for consistent, accurate tuning.